Technical data:
- Power cable according to IEC 60502-1 , DIN VDE 0271 , ISIRI 3569 , BS 5467
- Temperature range:
during installation up to C°-5
Operating temperature: Max C°+90
Short circuit. temperature: C°+250
- Nominal voltage: U0/U=0.6/1 KV
-Test voltage a.c. ,50Hz: 4 KV
Cable structure:
- Cu / XLPE / PVC / SWA / PVC
- Copper conductor class1 or 2 acc. to IEC 60228
- Insulation XLPE
- Galvanised steel or aluminium wire armoured
- Sheath PVC/ST2 90°C
Application:
Power cables for energy supply are installed in underground , in water , indoors , in cable ducts , power stations ,for industry and distribution boards as well as in subscriber networks.
where mechanical damages are not to be expected, for better mechanical protection armoured cables are used. For single core cables aluminum armour is recommended
Single Core:
|
Approx. Current kg/km |
Current capacity in air C°30 (A) |
Max. resistance at C°20 (Ω/KM) |
Overall dimensions mm |
Sheath thickness mm |
Tape Armour thickness Φmm |
Insulation thickness mm |
No.cores xNominal cross section mm2 |
| 207 | 60 | 4.61 | 12.0 | 1.8 | 0.9 | 0.7 | 1*4 |
| 236 | 75 | 3.08 | 12.5 | 1.8 | 0.9 | 0.7 | 1*6 |
| 290 | 95 | 1.83 | 13.3 | 1.8 | 0.9 | 0.7 | 1*10 |
| 385 | 128 | 1.15 | 14.8 | 1.8 | 0.9 | 0.7 | 1*16 |
| 550 | 173 | 0.727 | 17.2 | 1.8 | 1.25 | 0.9 | 1*25 |
| 640 | 212 | 0.524 | 18.0 | 1.8 | 1.25 | 0.9 | 1*35 |
| 790 | 258 | 0.387 | 19.3 | 1.8 | 1.25 | 1.0 | 1*50 |
| 1020 | 328 | 0.268 | 21.3 | 1.8 | 1.25 | 1.1 | 1*70 |
| 1350 | 404 | 0.193 | 23.7 | 1.8 | 1.6 | 1.1 | 1*95 |
| 1630 | 471 | 0.153 | 25.7 | 1.8 | 1.6 | 1.2 | 1*120 |
| 1920 | 541 | 0.124 | 27.3 | 1.8 | 1.6 | 1.4 | 1*150 |
| 2330 | 626 | 0.0991 | 29.7 | 1.9 | 1.6 | 1.6 | 1*185 |
| 2960 | 750 | 0.0754 | 32.6 | 2.0 | 1.6 | 1.7 | 1*240 |
| 3680 | 864 | 0.0601 | 35.8 | 2.1 | 2.0 | 1.8 | 1*300 |
| 4550 | 1020 | 0.0470 | 39.5 | 2.2 | 2.0 | 2.0 | 1*400 |
| 5690 | 1173 | 0.0366 | 43.0 | 2.3 | 2.0 | 2.2 | 1*500 |
Approx. weights for single core cables are basis of aluminium tape armouring
Available armouring with galvanised steel on request (for D.C systems)
Double-Cores:
|
Approx. Current kg/km |
Current capacity in air C°30 (A) |
Max. resistance at C°20 (Ω/KM) |
Overall dimensions mm |
Sheath thickness mm |
Tape Armour thickness Φmm |
Insulation thickness mm |
No.cores xNominal cross section mm2 |
| 360 | 24 | 12.1 | 13.9 | 1.8 | 0.9 | 0.7 | 2*1.5 |
| 610 | 32 | 7.41 | 14.7 | 1.8 | 0.9 | 0.7 | 2*2.5 |
| 480 | 42 | 4.61 | 15.7 | 1.8 | 0.9 | 0.7 | 2*4 |
| 650 | 53 | 3.08 | 17.3 | 1.8 | 1.25 | 0.7 | 2*6 |
| 810 | 73 | 1.83 | 19.0 | 1.8 | 1.25 | 0.7 | 2*10 |
| 1220 | 96 | 1.15 | 22.8 | 1.8 | 1.6 | 0.7 | 2*16 |
| 1625 | 130 | 0.727 | 26.2 | 1.8 | 1.6 | 0.9 | 2*25 |
3 Cores:
|
Approx. Current kg/km |
Current capacity in air C°30 (A) |
Max. resistance at C°20 (Ω/KM) |
Overall dimensions mm |
Sheath thickness mm |
Tape Armour thickness Φmm |
Insulation thickness mm |
No.cores xNominal cross section mm2 |
| 390 | 24 | 12.1 | 14.3 | 1.8 | 0.9 | 0.7 | 3*1.5re |
| 450 | 32 | 7.41 | 15.2 | 1.8 | 0.9 | 0.7 | 3*2.5re |
| 324 | 42 | 4.61 | 16.9 | 1.8 | 1.25 | 0.7 | 3*4re |
| 730 | 53 | 3.08 | 18.0 | 1.8 | 1.25 | 0.7 | 3*6re |
| 990 | 73 | 1.83 | 20.8 | 1.8 | 1.25 | 0.7 | 3*10rm |
| 1400 | 96 | 1.15 | 23.8 | 1.8 | 1.6 | 0.7 | 3*16rm |
| 1890 | 130 | 0.727 | 27.5 | 1.8 | 1.6 | 0.9 | 3*25rm |
| 2300 | 160 | 0.524 | 29.3 | 1.9 | 1.6 | 0.9 | 3*35rm |
| 2510 | 195 | 0.387 | 30.0 | 1.9 | 1.6 | 1.0 | 3*50sm |
| 3250 | 247 | 0.268 | 32.5 | 2.0 | 1.6 | 1.1 | 3*70sm |
| 4390 | 305 | 0.193 | 38.0 | 2.1 | 2.0 | 1.1 | 3*95sm |
| 5250 | 355 | 0.153 | 41.0 | 2.2 | 2.0 | 1.2 | 3*120sm |
| 6400 | 407 | 0.124 | 44.0 | 2.3 | 2.0 | 1.4 | 3*150sm |
| 8020 | 469 | 0.0991 | 49.0 | 2.4 | 2.5 | 1.6 | 3*185sm |
| 10150 | 551 | 0.0754 | 53.7 | 2.6 | 2.5 | 1.7 | 3*240sm |
| 12350 | 638 | 0.0601 | 64.0 | 2.9 | 2.5 | 1.8 | 3*300sm |
Approx. weights for multi core cables are basis of galvanised steel tape armouring
3.5 Cores:
|
Approx. Current kg/km |
Current capacity in air C°30 (A) |
Max. resistance at C°20 (Ω/KM) |
Overall dimensions mm |
Sheath thickness mm |
Tape Armour thickness Φmm |
Insulation thickness mm |
No.cores xNominal cross section mm2 |
| 2080 | 130 | 0.727/1.15 | 31.0 | 1.9 | 1.6 | 0.9/0.7 | 3*25/16 |
| 2450 | 160 | 0.524/1.15 | 32.5 | 1.9 | 1.6 | 0.9/0.7 | 3*35/16 |
| 2860 | 195 | 0.387/0.727 | 34.2 | 2.0 | 1.6 | 1.0/0.9 | 3*50/25 |
| 3890 | 247 | 0.268/0.524 | 38.0 | 2.1 | 2.0 | 1.1/0.9 | 3*70/35 |
| 4950 | 305 | 0.193/0.387 | 42.5 | 2.2 | 2.0 | 1.1/10 | 3*95/50 |
| 5600 | 355 | 0.153/0.268 | 45.5 | 2.3 | 2.0 | 1.2/1.1 | 3*120/70 |
| 7520 | 407 | 0.124/0.268 | 51.0 | 2.5 | 2.5 | 1.4/1.1 | 3*150/70 |
| 9100 | 469 | 0.0991/0.193 | 56.0 | 2.7 | 2.5 | 1.6/1.1 | 3*185/95 |
| 11450 | 551 | 0.0757/0.153 | 62.0 | 2.9 | 2.5 | 1.7/1.2 | 3*240/120 |
| 13800 | 638 | 0.0601/0.124 | 67.0 | 3.0 | 2.5 | 1.8/1.4 | 3*300*150 |
4 Cores:
|
Approx. Current kg/km |
Current capacity in air C°30 (A) |
Max. resistance at C°20 (Ω/KM) |
Overall dimensions mm |
Sheath thickness mm |
Tape Armour thickness Φmm |
Insulation thickness mm |
No.cores xNominal cross section mm2 |
| 430 | 24 | 12.1 | 15.0 | 1.8 | 0.9 | 0.7 | 4*1.5re |
| 500 | 32 | 7.41 | 16.0 | 1.8 | 0.9 | 0.7 | 4*2.5re |
| 700 | 42 | 4.61 | 17.8 | 1.8 | 1.25 | 0.7 | 4*4re |
| 830 | 53 | 3.08 | 19.0 | 1.8 | 1.25 | 0.7 | 4*6re |
| 1270 | 73 | 1.83 | 22.8 | 1.8 | 1.6 | 0.7 | 4*10rm |
| 1630 | 96 | 1.15 | 25.4 | 1.8 | 1.6 | 0.7 | 4*16rm |
| 2247 | 130 | 0.727 | 30.0 | 1.9 | 1.6 | 0.9 | 4*25rm |
| 2800 | 160 | 0.524 | 31.9 | 2.0 | 1.6 | 0.9 | 4*35rm |
| 3300 | 195 | 0.387 | 35.5 | 2.0 | 2.0 | 1.0 | 4*50sm |
| 4300 | 247 | 0.268 | 40.5 | 2.2 | 2.0 | 1.1 | 4*70sm |
| 5450 | 305 | 0.193 | 44.5 | 2.3 | 2.0 | 1.1 | 4*95sm |
| 7100 | 355 | 0.153 | 49.0 | 2.4 | 2.5 | 1.2 | 4*120sm |
| 8460 | 407 | 0.124 | 53.0 | 2.6 | 2.5 | 1.4 | 4*150sm |
| 10130 | 469 | 0.0991 | 57.5 | 2.7 | 2.5 | 1.6 | 4*185sm |
| 13020 | 551 | 0.0754 | 63.7 | 2.9 | 2.5 | 1.7 | 4*240sm |
| 15500 | 638 | 0.0601 | 70.0 | 3.1 | 2.5 | 1.8 | 4*300sm |
5 Cores:
|
Approx. Current kg/km |
Current capacity in air C°30 (A) |
Max. resistance at C°20 (Ω/KM) |
Overall dimensions mm |
Sheath thickness mm |
Tape Armour thickness Φmm |
Insulation thickness mm |
No.cores xNominal cross section mm2 |
| 475 | 18 | 12.1 | 15.8 | 1.8 | 0.9 | 0.7 | 5*1.5 |
| 660 | 24 | 7.41 | 17.7 | 1.8 | 1.25 | 0.7 | 5*2.5 |
| 785 | 31.5 | 4.61 | 18.9 | 1.8 | 1.25 | 0.7 | 5*4 |
| 935 | 40 | 3.08 | 20.3 | 1.8 | 1.25 | 0.7 | 5*6 |
| 1445 | 55 | 1.83 | 24.5 | 1.8 | 1.6 | 0.7 | 5*10 |
| 1880 | 72 | 1.15 | 27.5 | 1.8 | 1.6 | 0.7 | 5*16 |
| 2630 | 98 | 0.727 | 32.5 | 2.0 | 1.6 | 0.9 | 5*25 |
| 3360 | 120 | 0.524 | 35.8 | 2.1 | 2.0 | 0.9 | 5*35 |
Approx. weights for multi core cables are basis of galvanised steel tape armouring